Showing 1–16 of 29 results
The 2-Wheel Dry Line Marker from AlumaGoal is a walk-behind chalk applicator used to lay down foul lines, batter’s box outlines, coaching box borders, and other field markings on baseball, softball, and lacrosse fields. The 2-wheel design provides a stable platform that tracks in a straight line, producing clean, consistent chalk lines without the wobble…
The 4-Wheel Dry Line Marker from AlumaGoal is a high-capacity walk-behind chalk applicator built for programs that need to mark multiple fields efficiently. With a 65 lb. dry line chalk capacity — more than two and a half times the capacity of the 2-wheel model — this marker can line several complete baseball or softball…
The 5′ x 3′ Premium Nail Drag is a tow-behind infield grooming tool built for scarifying and loosening compacted clay on baseball and softball diamonds. The unit features 117 steel grooming nails — each measuring 6″ long by 1/4″ diameter — mounted in a welded steel frame. When pulled across the infield behind an ATV,…
This combo pairs the 5′ x 3′ Premium Nail Drag with a 6′ W x 18″ L rigid drag mat, providing a complete two-stage infield grooming system for baseball and softball fields. The nail drag scarifies and loosens compacted clay while the rigid drag mat follows behind to smooth, level, and finish the surface. Using…
The 10′ W x 6′ L All Steel Drag Mat is the largest size in the all-steel drag mat lineup, designed for efficient infield grooming on full-size baseball and softball diamonds. At 10 feet wide, this mat covers a broad swath of the infield in each pass, making it well suited for high school, collegiate,…
The 3′ W x 5′ L All Steel Drag Mat is a narrow-profile infield grooming tool designed for targeted maintenance on baseball and softball diamonds. The 3-foot width allows groundskeepers to drag specific areas of the infield — such as individual base paths, the area around home plate, or the front edge of the pitcher’s…
The 3′ W x 4′ L All Steel Drag Mat is the most compact option in the all-steel drag mat lineup, making it the most affordable entry point for programs adding steel mat grooming to their field maintenance routine. The small footprint and light weight make it easy to handle manually or tow behind a…
The 6′ W x 6′ L All Steel Drag Mat provides a balance of coverage and maneuverability for grooming baseball and softball infields. The 6-foot width covers base paths and infield arcs efficiently, while the 6-foot length delivers enough weight and surface contact to smooth loose dirt and fill in low spots left by cleat…
The 6′ W x 3′ L All Steel Drag Mat offers the same 6-foot grooming width as the larger 6′ x 6′ model but in a shorter, lighter configuration that is easier to maneuver in tight areas. The reduced length makes this mat a good option for programs using smaller tow vehicles or for groundskeepers…
The 24-inch Aluminum Maintenance Rake is a hand tool designed for precision grooming of baseball and softball infield surfaces. The narrow 24-inch head is purpose-built for working in confined areas where a full-width rake would be impractical — around base anchor plates, along the front edge of the pitcher’s mound, inside the batter’s box, and…
The 36-inch Aluminum Maintenance Rake is a mid-size hand tool for grooming baseball and softball infield dirt. The 36-inch head width covers more ground per stroke than the 24-inch model while remaining maneuverable enough to work around bases, the pitcher’s mound, and the batter’s box. This makes it the most versatile size in the aluminum…
The 48-inch Aluminum Maintenance Rake is the widest model in the aluminum maintenance rake line, designed for covering large areas of the baseball or softball infield in fewer passes. At four feet wide, this rake is the most efficient hand tool option for leveling base paths, smoothing the infield arc, and redistributing loose material across…
The Anchor Clean Out Tool is used to remove compacted dirt, clay, and debris from inside ground-mounted base anchor sleeves on baseball and softball fields. Even with regular use of base plugs, anchor sleeves accumulate material over the course of a season from cleat traffic, rain wash, and general field activity. When debris builds up…
The Big League Field Drag is a tow-behind steel infield grooming tool designed to break up compacted dirt and cinder on baseball and softball diamonds, running tracks, and other athletic surfaces. The unit uses 46 durable steel tines mounted in a rigid frame to scarify and loosen the top layer of compacted playing surfaces, which…
The Diamond Digger Field Groomer is a tow-behind infield conditioning system that combines scarification, leveling, and finishing into a single pass across baseball and softball diamonds. The unit attaches to an ATV, utility vehicle, or riding mower and uses a set of replaceable steel teeth to break up compacted infield clay, followed by a leveling…
The Diamond Digger Field Groomer Combo is the expanded version of the standard Diamond Digger, bundling the base grooming unit with additional finishing attachments for a more comprehensive infield conditioning system. The combo package is designed for programs that want a single tow-behind solution capable of handling every stage of infield grooming — from breaking…
My Account